U-Line 2275DWRR Installation Guide download pdf (Page 3)

09/2007 3 www.U-LineService.com

2275DWRR — Drawer Model Refrigerator

General Precautions

Use this appliance for its intended purpose only and

follow these general precautions along with those listed

throughout this guide:

WARNING

SHOCK HAZARD — Electrical Grounding Required.

• Keep the unit unplugged throughout installation

except during testing.

• Never remove the round grounding prong from

the plug and never use a two-prong grounding

adapter.

• Never use an extension cord to connect power to

the unit.

• Always keep your working area dry.

WARNING

The Anti-Tip Kit must be installed on this unit

before it is used. Never use the drawers as steps

or as a shelf to support more than the drawers’

contents. Serious personal injury could occur.

CAUTION

• Use care when moving and handling the unit. Use

gloves to prevent personal injury from sharp edges.

• Do not lift the unit by the drawer handle.

• Do not install the unit behind closed doors or in any

way that would obstruct airflow to the front grille,

which may cause the unit to malfunction.

You have received a carton containing your 2275DWRR

Drawer Model Refrigerator with a package inside

containing a Use and Care Guide, a Product Registration

Card and Anti-Tip Kit. Complete and mail the

Product Registration Card or register online at

www.U-LineService.com. Once your unit is installed,

keep the Use and Care Guide and this Installation Guide

in a safe place for future reference.

Your unit is Overlay or Stainless Steel. Overlay units have

drawers with top handles designed for the installation of

full overlay drawer panels. When full overlay panels will

not be used, replacement handles MUST be installed (part

number 26070-01). Stainless Steel units have drawers with

seamless full wrap stainless steel fronts (that do not

accept custom panels), sculpted stainless steel handles and

black vinyl-clad cabinets. Please carefully follow the

directions that apply to your unit and your intended

design.

Tools/Materials Required

• Wrenches

• Screwdrivers — slotted and Phillips head

• 1/4-inch thick drawer panel material and cutting tools

(Overlay units) (If installing a 1/4” Panel)

• 3/4-inch thick drawer panel overlay material, cutting

tools, drill and bits (Overlay units) (If installing a 3/4”

Full Overlay)

Inspection

Unwrap and inspect the unit on a flat, level surface

capable of supporting its entire weight.

Removing Protective Coating

All Models:

The protective coating covering the inside of both top

and bottom drawers must be removed before using.

Stainless Steel Models:

When inspecting/installing a Stainless Steel unit, the

protective coating covering the drawer fronts must be

removed. Start at a corner of the drawers and pull back

the protective coating to remove it from the drawer

fronts.

After all the protective coating has been removed from

the drawers, clean all Stainless Steel surfaces with Claire

Stainless Steel Polish and Cleaner or comparable product

or a mild detergent and warm water solution and soft

cloth. Do NOT use abrasive cleaning agents.

Note: If cleaning with mild detergent and warm water

solution and soft cloth, the unit MUST be treated with

Claire Stainless Steel Polish and Cleaner or comparable

product to prevent discoloration.

2 Inspect and Plan

1 2 3 4 5 6 7 8 ... 14 15

Comments to this Manuals

No comments

U-Line 2275DWRR Installation Guide Page 3

Comments to this Manuals

Related products and manuals for Unknown U-Line 2275DWRR