U-Line H-1027 Specifications download pdf (Page 8)

0513 IH-1027PAGE 8 OF 11

DRIVER REPLACEMENT

1. Disconnect the air supply.

2. Loosen screw and nut with a 8 mm spanner wrench

and a 4 mm Allen wrench. (See Figure 16)

3. Remove the magazine assembly. (See Figure 17)

4. Loosen the set screw with a 3 mm Allen wrench to

unlock the adjusting rod.

OPERATING INSTRUCTIONS CONTINUED

Magazine

Assembly

Spring Pin

5. Slide the linkage mechanism and adjusting rod

simultaneously from the collar. (See Figure 18)

6. Loosen the screws with a 3 mm Allen wrench.

(See Figure 19)

7. Take off the spring pin with a hammer and 6 mm

straight rod. (See FIgure 20)

Figure 16

Figure 18

Figu re 17

Figure 19

Figure 20

1 2 3 4 5 6 7 8 9 10 11

No comments

U-Line H-1027 Specifications Page 8