U-Line H-1027 Specifications download pdf (Page 11)

0513 IH-1027PAGE 11 OF 11

PISTON REPLACEMENT

1. Remove screws and nut with 8 mm spanner wrench

and 4 mm Allen wrench. (See Figure 31)

2. Remove magazine assembly. (See Figure 32)

3. Loosen set screw with a 3 mm Allen wrench to unlock

the adjusting rod.

4. Slide linkage mechanism and adjusting rod

simultaneously from collar.

5. Loosen collar with a 3 mm Allen wrench to remove

the spring. (See Figure 33)

Magazine Assembly

Cap

Piston Assembly

Spring

6. Loosen screw with a 3 mm Allen wrench and remove

the block through the window.

7. Loosen screws with a 3 mm Allen wrench and

remove the cap. (See Figure 34)

8. Remove the piston assembly with a 10 mm spanner

wrench. (See Figure 35)

9. Remove piston and replace.

OPERATING INSTRUCTIONS CONTINUED

CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA

1-80 0-295-5510

uline.com

Figure 31

Figure 34

Figure 32

Figure 35

Figure 33

1 2 ... 6 7 8 9 10 11

No comments

U-Line H-1027 Specifications Page 11