U-Line 2275DWRCOL Troubleshooting Guide download pdf (Page 12)

u-line.com 9

Wine Stocking Recommendation

Specially designed horizontal wine racks properly positioned the

bottles so the wine remains in contact with the cork and assure

the cork does not become dry.

Stock the unit as follows:

1. Stock the wine racks beginning with the lowest rack, at the

back, and working forward. Stagger the bottles as shown.

2. Repeat Step 1 to stock the next higher rack, and continue until

all racks are filled.

NOTE: After stocking, allow unit to run 24 hours to

stabilize product temperatures.

Wine Rack Removal and Installation

To remove a rack from the cabinet:

3. Remove any bottles stored on the rack.

4. Grasp the end of the rack, and gently slide it out until it stops.

5. Press the left rack release lever down. At the same time, lift the

matching right rack release lever up. Pull the rack out until it is

free of the tracks and the cabinet.

NOTICE

Do not remove the track rails from the cabinet.

To insert a rack in the cabinet:

Align the left and right rack channels with the tracks in the cabinet.

Ensure an even track engagement on both sides by gently pushing

the rack into the cabinet until it stops.

Before reloading the rack, ensure proper movement of the travel

stops in the left and right track rails by pulling the rack out gently

until it stops.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

U-Line 2275DWRCOL Troubleshooting Guide Page 12