U-Line 3000 SERIES User's Guide download pdf (Page 18)

USER GUIDE

Door Adjustments 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Door Adjustments

DOOR ALIGNMENT AND ADJUSTMENT

Align and adjust the door if it is not level or is not sealing

properly. If the door is not sealed, the unit may not cool

properly, or excessive frost or condensation may form in

the interior.

NOTICE

Properly aligned, the door’s gasket should be

firmly in contact with the cabinet all the way

around the door (no gaps). Carefully examine

the door’s gasket to ensure that it is firmly in

contact with the cabinet. Also make sure the

door gasket is not pinched on the hinge side of

the door.

CAUTION

Do not attempt to use the door to raise or pivot

your unit. This would put excessive stress on the

hinge system.

Stainless Models (Removing Wrap)

1. Open door completely.

2. Remove the two wrap screws from the bottom of the

stainless steel door wrap.

3. Gently pull bottom of wrap away from door.

4. The wrap hinges on top of the door. Carefully pull wrap

away and then up. See below.

5. If door being adjusted houses

the display unit, remove cable

from display by pressing in the

release tab on the cable

connector.

Wrap Screws

Cable Arm

Step 1

Step 2

Door Top

Door Bottom

Press Tab Down

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 44 45

No comments

U-Line 3000 SERIES User's Guide Page 18