U-Line 2115R Installation Guide download pdf (Page 14)

2115R — Refrigerator

www.U-LineService.com 14 08/2006

Installation of the 2115R

1. Plug in the power cord.

2. Gently push the unit into position. Be careful not to

entangle the electrical cord.

3. Re-check the leveling, from front to back and side to

side. Make any necessary adjustments. The unit’s top

surface should be approximately 1/8" below the

countertop.

Relocating the Shelves

Both the glass shelves in the refrigerator and the inner

door shelves can be moved to accommodate your bottles,

cans and containers.

Glass Shelves

1. Open door fully, grasp shelf firmly, lift front edge

slightly, and pull straight out.

2. Choose new location and slide shelf onto the

appropriate rib.

Door Shelves

1. First pull shelf up at a 45°

angle, then straight out

(see Figure 34).

2. Choose new location and

line up on bosses. First

push straight in, then

down at a 45° angle.

Installation Troubleshooting

Problem

The door remains open unless it is pushed closed.

Solution

The hinges should be self-closing when the door is open

approximately 8

. If this is not the case, make sure the

closers (at the bottom of the hinge pin) are clean, greased

and installed correctly. Also, re-check leveling from front

to back of the unit and readjust if necessary. Make sure

that pivot plate is installed correctly.

Problem

The custom overlay door was designed to align with the

rest of the cabinet doors, but the unit has crept forward.

Solution

Make sure that the electrical cord is not obstructing the

installation.

8 Install the Unit

Boss

Notch

Figure 34

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

U-Line 2115R Installation Guide Page 14

Comments to this Manuals

Related products and manuals for Fridges U-Line 2115R