U-Line 3024ZWC User's Guide Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
USER GUIDE
Control Operation 3
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
The following chart lists modes which include the quick
chill feature and the time which quick chill will run.
To initiate quick chill:
1. Press
to select the desired zone, left or right.
2. Press to select the desired mode setting.
3. Press until the temperature set point reads “Quick”.
The quick chill feature will then begin for the period of
time dictated by the mode type. To cancel quick chill,
simply select a set point other then “quick”.
NOTE: There may be a delay before quick chill is
activated. If the opposite zone is currently in a cooling
cycle while quick chill is selected, the cooling cycle on the
opposite zone will first be completed.
NOTE: Please note that when quick chill is activated in a
3036, the zone opposite the active quick chill zone will not
return to a cooling cycle until quick chill is complete. If
storing product in the opposite zone it is important to limit
the number of times the door is opened in the zone not
currently under quick chill.
INTERIOR LIGHTING
Your U-Line 3000 Series unit uses a state of the art LED
lighting system. The 3036 model dual zone’s lighting can
be independently controlled or set as a group.
1. To begin, press to enter the lighting menu.
2. The unit initially defaults to control the lighting in both
Zones simultaneously. To select a single zone press
. Notice the arrows on top of the display changing
state. Pressing once will select the left side zone,
pressing it again will select the right side zone, and
pressing it a third time will select both zones.
3. Press or to cycle through each available
brightness setting (Low, Medium or High).
4. Press to cycle through each available timer setting.
Selections include “On With Door”, “On 3 Hours”, “On 6
Hours”, or “On 24 Hours”.
5. To exit, press or simply wait for the menu to time
out.
ERROR NOTIFICATION
The 3000 model series continuously monitors a series of
inputs and parameters to ensure proper and efficient
operation of your unit. Should the system detect a fault,
an error notification will be displayed on the user
interface. See below for a list of errors.
Mode Run Time
Red Wine Not Available
White Wine 1 Hour
Sparkling Wine 1 Hour
Beverage/Drinks 4 Hours
Up
Zone Indicator Zone Indicator
Zone Toggle
Select
Down
U-Select Lighting
Power
3036 Model Display Shown
U-SELECT LIGHTING
ON WITH DOOR
LIGHTING
HIGH
LEVEL
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Comments to this Manuals

No comments