U-Line H-1028 Specifications download pdf (Page 9)

PHONE 1-800-295-5510 FAX 1-800-295-5571 WEB uline.com

Operating Instructions

Warning

1. Add a few drops of oil into the air inlet.

2. Install a quick connect fitting to the tool.

3. Regulate the air pressure to attain 80-100 psi.

4. Insert the staples into the tool following the loading instructions.

5. Reconnect the air hose to the tool.

6. Grasp the handle with one hand on box in line with the desired staple

location. There is a small projection on either side of the magazine seat as

an aid in locating the position of the staple.

7. The strongest closure requires staples close to the ends of the box.

Cleaning the Tool

Danger

1. Disconnect the Air Supply from the tool

2. Remove tar buildup with non-corrosive cleaner. Do not allow solvent to get

into the cylinder or damage may occur.

3. Dry the tool completely before use.

Never use gasoline or other flammable liquids to clean the stapler.

Vapors in the stapler could be ignited by a spark and cause the tool to explode.

1. Protect your eyes and ears. Wear:

a. Safety glasses with side shields

b. hearing protection.

Ensure that anyone in the vicinity wears safety protection.

2. To prevent accidental injuries never place a hand or any other body part in the staple

clinching area or adjustment window.

3. Never point the stapler towards you or anyone else.

4. Always handle the stapler with care. Never pull the trigger unless tool is ready for

operation.

5. Check and replace any damaged or worn components on the stapler.

CHICAGO • MINNEAPOLIS • LOS ANGELES • NYC/PHILA • ATLANTA • DALLAS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

U-Line H-1028 Specifications Page 9